TABLE OF CONTENTS
Download and Installation:
1. Connect the PQLabs touch overlay directly to the computer.
2. Download and install PQLabs MultiTouchPlatform and restart your computer.
3. Open C:\Program Files (x86)\PQLabs\MultiTouchPlatform, right-click on MultiTouchPlatform.exe and create a shortcut on your desktop.
4. Open MultiTouchPlatfotm. Make sure that the Device is Connected (see blue arrow) and press Calibrate\Calibrate position (see the orange mark).
5. Four white (+) signs will appear. Use your finger to press each (+) sign for 1-2 seconds, until it turns green and release.
6. Close the calibration software.
